close
    search Buscar

    Repair Wet iPhone with Screen Problems | iphonexpertise - Official Site

    Who I am
    Pau Monfort
    @paumonfort

    Item Feedback:

    Here is a very common scenario:

    Yesterday morning I put my iPhone in my back pocket. While I was in the bathroom, my iPhone accidentally fell into the water! I quickly got mine Wet iPhone from the toilet, wiped it off and immediately turned off the device. But now I don't know what to do to avoid water damage. Could anyone give me some advice? Thanks in advance.

    Below we will look at all the things to do when you have a wet iphone from water (both fresh and salt water) and try to fix the wet iPhone or at least recover the data in it. A wet iPhone can have several problems, the most common are:



    1. Wet iPhone won't turn on
    2. Wet iPhone with striped screen
    3. Wet iPhone with black screen
    4. Wet iPhone with blinking apple
    5. iPhone dropped into water it gives no signs of life

    As you can see, the causes of an iPhone dropped into water can range from the mildest to the most serious. It all depends on how much water has entered the device and which circuits have impacted. In any case, here are the steps to follow if you have a wet iPhone in your hands.

    • Step 1: Asciuga iPhone
    • Step 2: Turn off iPhone as soon as possible
    • Step 3: Buy DampRid or silica gel
    • Step 4: Attract remaining water
    • Step 5: Put the iPhone in a thick zippered case
    • Repair or Recover Wet iPhone Data with FoneLab

    1. Dry iPhone

    Take your iPhone out of the water and dry the surfaces right away!



    After your iPhone gets wet, the first thing you should do is remove the excess water and external water from everything you can reach and shake the device lightly to get rid of the water hiding in the ports and ports. taken. Do not use a hair dryer as the excess heat will damage your iPhone.

    2. Turn off iPhone as soon as possible

    If your iPhone is already off, you are in luck! Otherwise, you have to immediately turn off the iPhone wet by any means, as this is extremely essential to be able to repair iPhone water damage.

    Press and hold the power button for a few seconds, then slide the button to the right. If you can't slide to shut down on the first try, keep trying.

    You may eventually succeed on the ninth or tenth try. If you can turn it off, great - you'll have increased the chance of survival to 50 percent.

    If your iPhone is already off, that's better.

    3. Buy DampRid or silica gel

    Now, you should go to a hardware store or nearest supermarket to buy DampRid o silica gel

    If you can't, it is advisable to put your iPhone back in a zippered container or in a sealed container filled with uncooked rice. Store the bag in a warm, dry place for at least one day.

    However, the ideal would be to have some DampRid packs or silica gel as rice sometimes does not solve the situation.


    4. Attracts remaining water

    Place your iPhone between two DampRid packages and wrapped in a plastic bag.

    DampRid attracts and traps excess moisture from the air. It is much more effective than rice.


    5. Put the iPhone in a zippered case

    Now store your iPhone / DampRid with a heavy zippered case or sealed container and store it in a warm, dry place. Cross your fingers and wait at least 24 hours.


    When the time has come, open the bag or case, unpack your iPhone and turn it on. Nobody can promise anything but if you follow all the steps your iPhone's chances of survival are very good.

    6. Repair or Recover wet iPhone with FoneLab

    In case you have not been able to bring your iPhone back to life or it has turned on but you notice operating problems (such as black screen, striped screen, etc.) then we recommend that you rely on an iPhone repair tool and data recovery which is called FoneLab for iOS. Its operation is very simple.

    Download and install Fonelab iOS on your PC or Mac from the links below:

    How to fix wet iPhone with Fonelab

    Install the software on your PC or Mac. Then launch it from the desktop and choose the function IOS System Recovery


    Then connect your iPhone to the computer via the supplied USB cable. From the main screen of the program you can try both the "DATA RECOVERY" and "IOS REPAIR" functions.

    Let's say you want to fix wet iPhone that turns on but stays black or streaked. Follow the on-screen instructions to download the firmware package and install it on your device.

     

    Once the button is pressed Repair, the app will start restoring the firmware. If the failure of the iPhone is of a "software" nature, this program will surely solve the problem.

     



    Audio Video Repair Wet iPhone with Screen Problems | iphonexpertise - Official Site
    add a comment from Repair Wet iPhone with Screen Problems | iphonexpertise - Official Site
    Comment sent successfully! We will review it in the next few hours.